Product description

TejaRP-500 is solvent base rust preventive fluid having excellent water displacing properties for short term protection period. It is specially recommended after the pickling operation.

Product Specifications

Colour

Dark Brown Liquid

Odour

Solvent Smell

Foaming Tendency

Nil

Reliability

Good

Handling

Avoid Skin Contact

Solubility in solvent

Good

pH

7

Toxicity

Moderate

Flash Point

Below 175°F

Pollution

Very Minimum

Product Operating Data

Concentration

100%

Dip Time

1 – 2 minutes

Temperature R.T.

Film

Thin Oily

Non volatile Matter

25% w/v

Drying Time

Indoor 9 months

Protecting period

After Phosphating

Product Operating Procedure

Dip the cleaned and dried component in Teja RP-500. Allow the component to drip for 5 minutes.

The residual film can be easily removed by wiping with rag soaked in Kerosene or mineral turpentine.

Product Application Equipment's M. S. Tank

Testing and Control Procedure

No testing is required.

Chemical Replenishment

Discard the bath level with TejaRP-500 as and when required.

Safety Measures

TejaRP-500 is based upon organic compounds and flammable. So, while handling proper care should be taken. Protect eyes and skin, by means of goggles, aprons, gloves, etc. If it comes in contact with skin and eyes wash thoroughly with a flush of water and get medical advice. For further Information please refer our Material Handling and Personal safety Data Sheet No.2.

General Information
It is recommended for inter operational and for short term protection of components.